©


KBS PANEL HD200™


KBS PANEL HD200™ is a Swedish quality product created in a hand made production including an unique form moulding process. This results in fire panel with supreme characteristics. KBS PANEL HD200™ are produced in a special heat and high pessure tables (patented). The batts stays in this tables in over 40 minutes. This process is energy-intensive but gives advantageous and optimal fire protection characteristics.The surface of the  KBS PANEL HD200™ is the tough Flamastic KBS COATING™. Other characteristics to be mention are the high density, mechanical strength and superior heat conductivity. This is finally an outstanding concept only made in Sweden and that you will not find anywhere else. Joints and fillets around the panels and between panel parts are sealed / joined with KBS SEALANT™ which is a uniquely strong and flexible fire protection putty-like filler. KBS PANEL HD200™ is included in different systems with separation ability in fire class EI 30 to EI 120. The product is fire rated according to EN 13501-2:2007 + A1:2009. Example of this unique performance can be mentioned the 30 mm variant - KBS PANEL HD200/30™ which meets fire class E120 also with only 30 mm thin fire joints between panel parts. Completely outstanding in the market. KBS PANEL HD200™ is of course also one of the products in our own fire sealing systems for penetrations tested according EN 1366-3 (see special information for the two systems KBS KOMBISEAL ABL™and KBS FIRESEAL HD200™. The product could also be installed in spaces with increased surface layer requirements e.g meeting rooms or escape routes with high demands as reaction to fire class B-s1,d0 according EN 13501-1.

kbsskivan.jpg (21993 bytes) ©

KBS PANEL HD200™ design allows quicker and easier installation with better outcome and with a cost-saving installation on construction site. The product is available in different sizes and  thicknesses.

Chararacteristics:
- Fire resistance class EI 30 - EI 120 [EN 13501-2]
- Fire reaction class:  B-s1,d0 [EN 13501-1]
- Thicknesses: 60 -15 mm
- Stable
- Easy to figure adapt
- Nominal density 230 kg/m³
- Tough and flexible
- Unique protection prestanda

 


 

Technical Information
Technical data sheet

     
             

Swedcert2.jpg (4394 bytes)P-Mark-2013.jpg (3477 bytes)EN-13501-2-3.jpg (4309 bytes)


logokbs.jpg (3890 bytes)

This original Trademark Seal symbolizes over 50 years of unbroken experience and knowledge within passive fire protection.
It all started with Nasas Apollo program in the 60´s.
Don´t hesitate to put this Seal on your installations as well.

Contact us
+46 10 20 40 115
E-mail

© Copyright KBS BRANDSKYDD AB +46 102040115 Nääs Fabriker - Tollered

© This website is protected by Copyright laws. This includes trademarks, photographs, drawings amd images.
KBS BRANDSKYDD AB +46 102040115