KBS CHAR 21™ | - HEA-beams tables
| 2015-09-24 | In Swedish

Click the appropriate size of the profile on the red arrow (see below). Then you get a paint variety that is dependent on 1-4 sided fire exposure, load capacity utilization and the required fire rating.

To select a different dimension, click on the top of each table header to get back to the red arrow.

To select a complete different profile type, you can click on to go back to the table main page.

For calculation of DFT (dry film thickness) a factor called Hp/A (heated perimeter divided by cross sectional area) is used. KBS CHAR 21 is applied as an intermediate coat in a coating system (primer, intermediate and top/finish coat). Because of the relatively low thickness of KBS CHAR 21, nice finish and anti-corrosive nature, this coating is preferred aesthetically and performance-wise. It should be noted that steel attains critical core temperature depending on the Load utilisation in the fire limit state [µ₀]: 10-90 %.The design of the KBS CHAR 21™ is based on classification according EN 13501-2, and the instructions given in Eurocode 3. The lower Load utilisation in the fire limit state [µ₀] is the smaller amount of fire protection paint is required. If you do not have data for [µ₀] you can use 80% for columns and 66% for beams. This is on the safe side in all the static cases, but may give an over-dimensioning of the amount of paint. Therefore we recommend to obtain the real utilization for each steel section from the steel constructor.

Here you select sizes of HEA-PROFILE

HEA 100	HEA 120	HEA 140	HEA 160	HEA 180	HEA 200	HEA 220	HEA 240	HEA 260	HEA 280
HEA 300	HEA 320	HEA 340	HEA 360	HEA 400	HEA 450	HEA 500	HEA 550	HEA 600	HEA 650
HEA 700	HEA 800	HEA 900	HEA 1000

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 100	1-Sided	100 47	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	190 90	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	460 217	R30	400	400	488	569	812	973	1150	1320	1671
			R60	1706	1844	2217	2543	2844	3142	3469	3782	-
			R90	3216	3417	-	-	-	-	-	-	-
	4-Sided	561 264	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2121	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 120	1-Sided	120 47	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	230 90	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	560 220	R30	400	400	488	569	812	973	1150	1320	1671
			R60	1706	1844	2217	2543	2844	3142	3469	3782	-
			R90	3216	3417	-	-	-	-	-	-	-
	4-Sided	677 267	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2121	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 140	1-Sided	140 45	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	270 85	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	650 208	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1690	2042	2351	2635	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-
	4-Sided	794 253	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2121	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

160

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 160	1-Sided	160 41	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	300 78	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	750 192	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1690	2042	2351	2635	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-
	4-Sided	906 234	R30	400	406	544	730	902	1070	1256	1435	1802
			R60	1842	1987	2380	2722	3037	3350	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 180	1-Sided	180 40	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	340 76	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	840 186	R30	400	400	400	486	613	756	913	1064	1378
			R60	1400	1522	1853	2144	2412	2676	2927	3246	-
			R90	2734	2913	3396	-	-	-	-	-	-
	4-Sided	1020 225	R30	400	400	488	649	716	868	1150	1320	1671
			R60	1760	1844	2217	2543	2636	2918	3469	3782	-
			R90	2984	3417	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 200	1-Sided	200 37	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	380 71	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	940 175	R30	400	400	400	486	613	756	913	1064	1378
			R60	1400	1522	1853	2144	2412	2676	2927	3246	-
			R90	2734	2913	3396	-	-	-	-	-	-
	4-Sided	1140 212	R30	400	400	488	649	716	868	1150	1320	1671
			R60	1706	1844	2217	2543	2636	2918	3469	3782	-
			R90	3216	3417	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 220	1-Sided	220 34	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	420 65	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1040 162	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-
	4-Sided	1260 196	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1690	2042	2351	2636	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 240	1-Sided	240 31	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	460 60	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1130 147	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	4-Sided	1370 178	R30	400	400	400	486	613	756	913	1064	1378
			R60	1400	1522	1853	2144	2412	2676	2967	3246	-
			R90	2734	2913	3396	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 260	1-Sided	260 30	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	500 58	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1220 141	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	4-Sided	1480 170	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 280	1-Sided	280 29	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	540 56	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1320 136	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	4-Sided	1600 165	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 300	1-Sided	300 27	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	580 52	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1420 126	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1616	1814	2038	2252	2706
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	4-Sided	1720 153	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 320	1-Sided	300 24	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	620 50	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1460 117	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1616	1814	2038	2252	2706
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	4-Sided	1760 142	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3042	3425	3754	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 340	1-Sided	300 23	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	660 49	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1490 112	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1616	1814	2038	2252	2706
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	4-Sided	1790 134	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3042	3425	3754	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 360	1-Sided	300 21	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	660 49	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1490 107	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	4-Sided	1790 129	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 400	1-Sided	300 19	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	780 49	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1610 101	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	4-Sided	1910 120	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 450	1-Sided	300 17	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	880 49	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1710 96	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	4-Sided	2010 113	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 500	1-Sided	300 16	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	980 50	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1810 91	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	4-Sided	2110 107	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1613	1938	2223	2486	2746	3038	3308	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 550	1-Sided	300 14	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	1080 51	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	1910 91	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	4-Sided	2210 104	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1613	1938	2223	2486	2746	3038	3308	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 600	1-Sided	300 13	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	1180 52	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	2010 89	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	4-Sided	2310 102	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1613	1938	2223	2486	2746	3038	3308	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 650	1-Sided	300 12	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	1280 53	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	2110 87	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	4-Sided	2410 100	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1613	1938	2223	2486	2746	3038	3308	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 700	1-Sided	300 11	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	1380 53	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	2200 84	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	4-Sided	2500 96	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1613	1938	2223	2486	2746	3038	3308	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 800	1-Sided	300 10	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	1580 55	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	2400 84	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	4-Sided	2700 95	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1613	1938	2223	2486	2746	3038	3308	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 900	1-Sided	300 9	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	1780 56	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	2600 81	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	4-Sided	2900 91	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1613	1938	2223	2486	2746	3038	3308	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] )

PROFILE	Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
HEA 1000	1-Sided	300 9	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	1980 57	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	920	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	3-Sided	2800 81	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	4-Sided	3100 89	R30	400	400	400	400	400	400	401	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3137

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]