http://dator-3/kbs/TIChar21-Upe-E-profil.htm

System KBS CHAR 21™ | - UPE-PROFILE tabell
| © KBS BRANDSKYDD AB 2014-03-17 | In Swedish

Click the appropriate size of the profile on the red arrow (see below). Then you get a paint variety that is dependent on 1-4 sided fire exposure, load capacity utilization and the required fire rating.

To select a different dimension, click on the top of each table header to get back to the red arrow.

To select a complete different profile type, you can click on to go back to the table main page.

For calculation of DFT (dry film thickness) a factor called Hp/A (heated perimeter divided by cross sectional area) is used. KBS CHAR 21 is applied as an intermediate coat in a coating system (primer, intermediate and top/finish coat). Because of the relatively low thickness of KBS CHAR 21, nice finish and anti-corrosive nature, this coating is preferred aesthetically and performance-wise. It should be noted that steel attains critical core temperature depending on the Load utilisation in the fire limit state [µ₀]: 10-90 %.The design of the KBS CHAR 21™ is based on classification according EN 13501-2, and the instructions given in Eurocode 3. The lower Load utilisation in the fire limit state [µ₀] is the smaller amount of fire protection paint is required. If you do not have data for [µ₀] you can use 80% for columns and 66% for beams. This is on the safe side in all the static cases, but may give an over-dimensioning of the amount of paint. Therefore we recommend to obtain the real utilization for each steel section from the steel constructor.

Here you select sizes of UPE-Profiles

UPE 80	UPE 100	UPE 120	UPE 140	UPE 160	UPE 180	UPE 200	UPE 220	UPE 240	UPE 270
UPE 300	UPE 330	UPE 360	UPE 400

U Back to tables50

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	**Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 80	1-Sided	50 50	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	160 158	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-
	3-Sided	290 287	R30	400	465	674	875	1061	1244	1445	1636	2036
			R60	2088	2246	2670	3042	3366	3667	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	340 337	R30	492	586	840	1060	1263	1464	1684	1894	2331
			R60	2402	2575	3042	3450	-	-	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

50 U Back to tables5

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 100	1-Sided	55 44	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	200 160	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-
	3-Sided	345 276	R30	400	465	674	875	1061	1244	1445	1636	2036
			R60	2088	2246	2670	3042	3366	3667	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	400 320	R30	452	543	788	1003	1200	1395	1609	1814	2239
			R60	2304	2472	2925	3322	-	-	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 120	1-Sided	60 39	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	240 156	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-
	3-Sided	400 260	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2221	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	460 299	R30	406	495	734	942	1133	1322	1529	1728	2140
			R60	2200	2363	2802	3187	-	-	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 0

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 140	1-Sided	65 35	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	280 152	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-
	3-Sided	455 247	R30	400	406	544	730	902	1070	1256	1434	1802
			R60	1842	1987	2380	2722	3037	3350	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	520 283	R30	400	465	674	875	1061	1244	1445	1636	2036
			R60	2088	2246	2670	3042	3366	3667	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 0

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 160	1-Sided	70 32	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	320 148	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	510 235	R30	400	406	544	730	902	1070	1256	1434	1802
			R60	1842	1987	2380	2722	3037	3350	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	580 267	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2221	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 50

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 180	1-Sided	75 30	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	360 143	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	565 225	R30	400	406	488	649	812	973	1150	1320	1671
			R60	1706	1844	2217	2543	2844	3142	3469	3782	-
			R90	3216	3417	-	-	-	-	-	-	-
	4-sided	640 255	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2221	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 U50

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 200	1-Sided	80 28	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	400 138	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	620 214	R30	400	406	488	649	812	973	1150	1320	1671
			R60	1706	1844	2217	2543	2844	3142	3469	3782	-
			R90	3216	3417	-	-	-	-	-	-	-
	4-sided	700 241	R30	400	406	544	730	902	1070	1256	1434	1802
			R60	1842	1987	2380	2722	3037	3350	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 50

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 220	1-Sided	85 25	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	440 130	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	3-Sided	675 199	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1844	2042	2351	2636	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-
	4-sided	760 224	R30	400	400	488	649	812	973	1150	1320	1671
			R60	1706	1844	2217	2543	2844	3142	3469	3782	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 U50

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ))

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 240	1-Sided	90 23	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	480 125	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	3-Sided	720 187	R30	400	400	400	486	613	756	913	1064	1378
			R60	1400	1522	1853	2144	2412	2676	2967	3246	-
			R90	2734	2913	3396	-	-	-	-	-	-
	4-sided	810 210	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1844	2042	2351	2636	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 270	1-Sided	95 21	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	540 121	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	3-Sided	795 178	R30	400	400	400	486	613	756	913	1064	1378
			R60	1400	1522	1853	2144	2412	2676	2967	3246	-
			R90	2734	2913	3396	-	-	-	-	-	-
	4-sided	890 199	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1844	2042	2351	2636	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 50

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 300	1-Sided	100 18	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	600 106	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	3-Sided	870 154	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-
	4-sided	970 171	R30	400	400	400	486	613	756	913	1064	1378
			R60	1400	1522	1853	2144	2412	2676	2967	3246	-
			R90	2734	2913	3396	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 U50

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 330	1-Sided	105 16	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	660 97	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	3-Sided	935 138	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	4-sided	1040 153	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 U50

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 360	1-Sided	110 14	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	720 92	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	3-Sided	1010 130	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	4-sided	1120 144	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables5 50

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] )

PROFILE	*Exposure	Hp [mm] Hp/A [m-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
UPE 400	1-Sided	115 13	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	800 87	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	1105 120	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	4-sided	1220 133	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]