http://dator-3/kbs/TIChar21-Uprofil-E.htm

System KBS CHAR 21™ | - U-PROFILE tabell
| © KBS BRANDSKYDD AB 2014-03-17 | In Swedish

Click the appropriate size of the profile on the red arrow (see below). Then you get a paint variety that is dependent on 1-4 sided fire exposure, load capacity utilization and the required fire rating.

To select a different dimension, click on the top of each table header to get back to the red arrow.

To select a complete different profile type, you can click on to go back to the table main page.

For calculation of DFT (dry film thickness) a factor called Hp/A (heated perimeter divided by cross sectional area) is used. KBS CHAR 21 is applied as an intermediate coat in a coating system (primer, intermediate and top/finish coat). Because of the relatively low thickness of KBS CHAR 21, nice finish and anti-corrosive nature, this coating is preferred aesthetically and performance-wise. It should be noted that steel attains critical core temperature depending on the Load utilisation in the fire limit state [µ₀]: 10-90 %.The design of the KBS CHAR 21™ is based on classification according EN 13501-2, and the instructions given in Eurocode 3. The lower Load utilisation in the fire limit state [µ₀] is the smaller amount of fire protection paint is required. If you do not have data for [µ₀] you can use 80% for columns and 66% for beams. This is on the safe side in all the static cases, but may give an over-dimensioning of the amount of paint. Therefore we recommend to obtain the real utilization for each steel section from the steel constructor.

Here you select sizes of U-profiles

U30	U40	U50	U65	U80	U100	U120	U140	U160	U180
U200	U220	U240	U260	U280	U300	U320	U350	U380	U400

Back to tables

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	**Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U30	1-Sided	30 61	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	60 110	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1102	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	3-Sided	143 252	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2121	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	170 312	R30	452	543	788	1003	1200	1395	1609	1814	2239
			R60	2304	2472	2925	3322	-	-	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Back to tables

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U40	1-Sided	30 61	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	80 129	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	3-Sided	162 262	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2121	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	198 319	R30	452	543	788	1003	1200	1395	1609	1814	2239
			R60	2304	2472	2925	3322	-	-	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Back to tables

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U50	1-Sided	40 53	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	130 144	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	191 268	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2121	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	229 322	R30	452	543	788	1003	1200	1395	1609	1814	2239
			R60	2304	2472	2925	3322	-	-	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables65

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ0] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U65	1-Sided	40 47	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	130 144	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	231 256	R30	400	436	612	805	983	1159	1353	1538	1923
			R60	1970	2121	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	273 302	R30	406	495	734	942	1133	1322	1529	1728	2140
			R60	2200	2363	2802	3187	-	-	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Back to tables U80

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U80	1-Sided	40 41	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	160 145	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	268 243	R30	400	406	544	730	902	1070	1256	1434	1802
			R60	1842	1987	2380	2722	3037	3350	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	313 284	R30	400	465	674	875	1061	1244	1455	1636	2036
			R60	2088	2246	2670	3042	3366	3667	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables100

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U100	1-Sided	50 37	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	200 149	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	322 239	R30	400	406	544	730	902	1070	1256	1434	1802
			R60	1842	1987	2380	2722	3037	3350	-	-	-
			R90	-	-	-	-	-	-	-	-	-
	4-sided	327 277	R30	400	465	674	875	1061	1244	1455	1636	2036
			R60	2088	2246	2670	3042	3366	3667	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

1 Back to tables20

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U120	1-Sided	50 32	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	240 141	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	374 220	R30	400	400	488	649	812	973	1150	1320	1671
			R60	1706	1844	2217	2543	2844	3142	3469	3782	-
			R90	3216	3417	-	-	-	-	-	-	-
	4-sided	429 252	R30	400	436	612	805	983	1159	1353	1538	2417
			R60	1970	2121	2530	2888	3217	3542	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U1 Back to tables40

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U140	1-Sided	60 30	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	280 138	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	427 210	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1690	2042	2351	2636	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-
	4-sided	487 239	R30	400	406	544	730	902	1070	1256	1434	1802
			R60	1842	1987	2380	2722	3037	3350	-	-	-
			R90	-	-	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U1 Back to tables60

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U160	1-Sided	60 27	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	320 133	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-
	3-Sided	480 200	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1690	2042	2351	2636	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-
	4-sided	545 227	R30	400	400	488	649	818	973	1150	1320	1671
			R60	1706	1844	2217	2543	2844	3142	3469	3782	-
			R90	3216	3417	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

Back to tables180

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U180	1-Sided	70 25	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	360 129	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	3-Sided	533 191	R30	400	400	400	562	716	868	1037	1198	1531
			R60	1400	1690	1853	2351	2636	2918	3228	3524	-
			R90	2734	3175	3396	-	-	-	-	-	-
	4-sided	603 216	R30	400	400	488	649	812	973	1150	1320	1671
			R60	1706	1844	2217	2543	2844	3142	3469	3782	-
			R90	3216	3417	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

20 Back to tables0

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U200	1-Sided	70 23	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	400 124	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	3-Sided	585 182	R30	400	400	400	562	613	756	913	1064	1378
			R60	1400	1522	1853	2351	2412	2676	2967	3246	-
			R90	2734	2913	3396	-	-	-	-	-	-
	4-sided	660 205	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1690	2042	2351	2636	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

20 Back to tables

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U220	1-Sided	80 21	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	440 118	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1814	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	3-Sided	638 170	R30	400	400	400	562	613	756	913	1064	1378
			R60	1228	1342	1649	1918	2176	2414	2635	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-
	4-sided	718 192	R30	400	400	430	562	716	868	1037	1198	1531
			R60	1560	1690	2042	2351	2636	2918	3228	3524	-
			R90	2984	3175	-	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables240

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U240	1-Sided	80 20	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	440 113	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1298	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	-	-	-
	3-Sided	691 163	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2176	2414	2635	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-
	4-sided	776 183	R30	400	400	400	486	613	756	913	1064	1378
			R60	1400	1522	1853	2144	2412	2676	2967	3246	-
			R90	2734	2913	3396	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U260 Back to tables

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U260	1-Sided	90 19	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	520 105	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1298	1471	1668	1856	2249
			R90	1496	1615	1938	2283	2486	2746	3033	3308	-
	3-Sided	743 154	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2176	2414	2635	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-
	4-sided	833 172	R30	400	400	400	486	613	756	913	1064	1378
			R60	1400	1522	1853	2144	2412	2676	2967	3246	-
			R90	2734	2913	3396	-	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

2 Back to tables80

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U280	1-Sided	90 19	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	560 105	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1298	1471	1668	1856	2249
			R90	1496	1615	1938	2283	2486	2746	3033	3308	-
	3-Sided	795 149	R30	400	400	400	400	435	507	633	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2186	2320	2731	3092	3425	3754	-	-	-
	4-sided	890 167	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2685	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U300 Back to tables

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U300	1-Sided	100 17	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	600 102	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1298	1471	1668	1856	2249
			R90	1496	1615	1938	2283	2486	2746	3033	3308	-
	3-Sided	849 144	R30	400	400	400	400	435	507	633	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2186	2320	2731	3092	3425	3754	-	-	-
	4-sided	941 162	R30	400	400	400	422	500	633	780	920	1212
			R60	1228	1342	1649	1918	2167	2414	2685	2944	3485
			R90	2464	2630	3078	3471	-	-	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U3 Back to tables20

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U320	1-Sided	100 13	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	640 84	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	882 116	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1841	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	4-sided	982 130	R30	400	400	400	422	400	400	492	592	834
			R60	836	930	1184	1406	1610	1841	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U35 Back to tables0

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U350	1-Sided	100 13	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	700 90	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	950 123	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1841	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	4-sided	1050 136	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U Back to tables380

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U380	1-Sided	100 13	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	760 94	R30	400	400	400	400	400	400	401	402	617
			R60	612	694	916	1112	1292	1471	1668	1856	2249
			R90	1496	1615	1938	2223	2486	2746	3033	3308	-
	3-Sided	1008 125	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1841	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	4-sided	1110 138	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]

U40 Back to tables0

Amount of paint in gram per m² (Depending of Load utilisation in the fire limit state [µ₀] ).

PROFILE	*Exposure	Hp [mm] Hp/A [m^-¹]	Class EN 13501-2	10%	20%	30%	40%	50%	60%	70%	80%	90%
U400	1-Sided	100 12	R30	400	400	400	400	400	400	400	400	400
			R60	400	400	400	455	550	670	803	930	1197
			R90	680	760	977	1168	1345	1519	1713	1898	2286
	2-Sided	800 87	R30	400	400	400	400	400	400	400	400	408
			R60	400	452	622	787	939	1090	1257	1416	1750
			R90	1108	1209	1481	1722	1944	2164	2407	2640	3127
	3-Sided	1070 117	R30	400	400	400	400	400	400	492	592	834
			R60	836	930	1184	1406	1610	1841	2038	2252	2701
			R90	1848	1984	2353	2678	2977	3282	-	-	-
	4-sided	1180 133	R30	400	400	400	400	435	507	635	764	1033
			R60	1040	1144	1427	1674	1901	2127	2376	2614	3110
			R90	2168	2320	2731	3092	3425	3754	-	-	-

DFT is the Amount of paint in gram per m² x 0,5
E.g 2304 g/m² x 0,5 = 1152 micrometer [µM]