|
|
KBS KOMBISEAL ABL™
| KBS
KOMBISEAL ABL™ is a CE-marked fire sealing system based on stone wool boards (class A1) in
combination with extremely tough fire coating and fire putty. The system is a further
development of KBS FIRESEAL HD200™
and all classic products are found from this system. Fire tested for joists, solid and
lightweight walls. Depending on the desired fire class, either a single fire board (ABL60) or double in ABL90/120
is used. This is a system with a European ETA for fire sealing of penetrations for
electrical cables, electrical ladders, metal pipes, plastic pipes. It is also unique that
the different types of penetrations can be fire sealed separately or conveniently combined
in one and the same seal (so-called mixed penetration system). The system can also be
installed in premises with surface layer requirements of fire class B-s1,d0. |
|
Flamastic KBS COATING™ is a thermodynamic fire protection
coating that consumes energy in the event of a fire. The product is an original product
from the aerospace industry. This coating is used in joints, hollow cores and to fire
protect cables, pipes, boards etc. It becomes tough but still flexible (ISO 1519). Flamastic KBS COATING™ has a
temperature-stable highest possible oxygen index value (ISO 4589-2). This value is also
uniquely age-resistant +40 years outdoors. |
|
Flamastic KBS SEALANT™ is a high-temperature sealant used to seal around cables, pipes, fire panels and ducts. The product's good adhesion remains throughout the fire process. A prerequisite for this is a temperature-stable and high oxygen index value. Flamastic KBS SEALANT™ is water-resistant and is used extensively in harsh environments. The product is also silicone-free and is therefore recommended in silicone-sensitive environments. The fire protection properties are age-resistant +40 years. |
|
KBS
FIRE BOARD 220/A1™ is a smooth and stable fireproofing board with a density of 220 kg/m³ and a
fire resistance class according to A1 [EN 13501-1]. This product has optimal properties
for simpler fireproofing and is also supplied in different sizes. KBS FIRE BOARD 220/A1™ is cut to size and adapted on site
to the existing penetration. The board parts are then joined and joined with KBS SEALANT™ and finally the outside is
painted with KBS COATING™. |
|
KBS-PANEL
HD200™
is a smooth high-density product with a pre-treated surface layer of Flamastic
KBS COATING™. The product has a nominal density of 220 kg/m³ and
optimal characteristics with a well-documented fire resistance (including an independent
EU classification according to EN 13501-2 and EN 13501-1). The product is supplied in
various thicknesses from 60 to 15 mm. KBS-PANEL HD200™
is precisely figured, which reduces waste, working time and gives a better result. The
product can also be used in premises with a surface layer requirement of class B-s1,d0. |
|
Features: |
|
Contact us |
| © Copyright KBS BRANDSKYDD AB
+46 10 20 40 115 Nääs Fabriker - Tollered |
 ©
This original Trademark Seal symbolizes over 50 years of unbroken experience and knowledge within passive fire protection. It all started with Nasas Apollo program in the 60´s. Don´t hesitate to put this Seal on your installations as well. |
© This
website is protected by Copyright laws. This includes trademarks, photographs, drawings
amd images. KBS BRANDSKYDD AB +46 102040115 |
©
©
©
©
©
©
©
